Cleveland MKET-12-T Instructions d'exploitation télécharger pdf (Page 3)

GENERAL

Installation of the kettle must be accomplished by

qualified electrical installation personnel working

to all applicable local and national codes.

Improper installation of product could cause injury

or damage.

This equipment is built to comply with applicable

standards for manufacturers. Included among

those approval agencies are: UL, NSF, ASME/Ntl.

Bd., CSA, CGA, ETL, and others. Many local

codes exist, and it is the responsibility of the

owner/installer to comply with these codes.

Note: Maximum voltage for LVD (low volt

directive for Europe) to be 440 volts for CE

marked appliances.

INSPECTION

Before unpacking visually inspect the unit for

evidence of damage during shipping.

If damage is noticed, do not unpack the unit, follow

Shipping Damage Instructions shown below.

SHIPPING DAMAGE

INSTRUCTIONS

If shipping damage to the unit is discovered or

suspected, observe the following guidelines in

preparing a shipping damage claim.

1. Write down a description of the damage or the

reason for suspecting damage as soon as it is

discovered. This will help in filling out the claim

forms later.

2. As soon as damage is discovered or

suspected, notify the carrier that delivered the

shipment.

3. Arrange for the carrier's representative to

examine the damage.

4. Fill out all carrier claims forms and have the

examining carrier sign and date each form.

INSTALLATION

The first installation step is to refer to the

Specification Sheets or Specification Drawings for

detailed clearance requirements of the kettle.

Next, carefully cut open the shipping carton for

easy removal of the kettle.

ASSEMBLY

Table-top models (12 gallon) must be positioned on

a firm, level stand, or existing counter top, and

bolted in place. These models are supplied with four

threaded mounting bushings welded to the

underside of the base. An optional support stand

with level adjustable legs is available. Once the kettle

is secure, screw tilt handle into the threaded hole

provided at the right side of kettle.

Floor Type Leg Mount Models (20 gallon)

Position on a firm, level surface, and bolt flanged

feet in place. Once the kettle is secure, screw tilt

handle into the threaded hole provided at the right

of kettle.

ELECTRICAL

ENSURE THE ELECTRICAL SUPPLY MATCHES

THE KETTLE'S REQUIREMENTS AS STATED

ON THE RATING LABEL.

This kettle is built to comply with applicable

standards of manufacturers. Included among

these approval agencies are UL, NSF, ASME/Ntl.

Bd., CSA, ETL, and others. Many local codes

exist, and it is the responsibility of the owner and

installer to comply with these codes.

The electrical supply must match the power

requirements specified on the kettle’s rating plate.

The copper wiring must be adequate to carry the

required current at the rated voltage.

Note: Maximum voltage for LVD (low volt

directive for Europe) to be 440 volts for CE

marked appliances.

INSTALLATION

1 2 3 4 5 6 7 8 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Cleveland MKET-12-T Instructions d'exploitation Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Bouilloires électriques Cleveland MKET-12-T